Characteristics:

• HEADBOARD AND FOOTBOARD: removable structured on the sides, located at both ends of the bed, made of polyethylene.
• BASE: Chassis with base made of 50 x 30 x 2.0 mm carbon steel metal, with recessed feet covered in high-resistance thermoplastic material
• DECK STRUCTURE: Made of carbon steel metal 30 x 30 x 1.5 mm and 50 x 30 x 2.0 mm, fully coated in ABS, high-impact thermoformed.
• DECK: Articulated into 3 sections, including back, seat and retractable footboard. (with split option)
• MOVEMENTS: Trendelenburg, Reverse Trendelenburg, elevation of the back, elevation of the bed and elevation of the seat, with a semicircular opening in the center of 335 mm.
• MOTORS: Movement system using 4 motors driven by electrical command through ACO control and FPP satellite system. With optional standard wired remote control. Protection level against water penetration IPX 6.
• GRIDS: Sides located on the back, polyethylene, furniture
• by the semi-rotary system, allowing them to be above or below
• below the bed.
• ACCESSORIES: equipped with a pair of upholstered thigh supports, with adjustable height and stainless steel attachments. A pair of height-adjustable support bars, made of stainless steel, located on the sides of the bed, which provide assistance to the woman in labor or a stainless steel strain arch. Stainless steel basin located under the footrest, for waste collection, 5 liters.
• DURING BIRTH: allows, through a device, the retraction of the legs under the bed for the moment of birth. Provided with a fitting to store the footrest next to the headboard.
• Stainless steel serum support, with adjustable height, adaptable on both sides of the headboard.
• BUMPER: fixed to the ends to protect against damage from impacts on walls and/or other furniture.
• CASTERS: 150 mm in diameter with conductive polyurethane tread, with movement/brake system activated by a single pedal, placed on two sides of the bed base, allowing free movement of the 4 casters in all directions, being able to direct 2 casters for long travel and locking the 4 casters, preventing the bed from moving.
• MATTRESSES: foam covered in leatherette, according to the parts of the bed, bi-partite / tri-partition.
• FINISH: Electrostatic powder painting with epoxy polyester resin and polymerized in an oven, excellent chemical and mechanical resistance, after anti-rust treatment.
• CAPACITY: 180 kg.
• Paint finish colors vary depending on
• at the customer’s option, the standards being white or beige.
• Dimensions
• – Internal: 1.90 x 0.90 m (± 0.15 m);
• – External: 2.13 x 1.05 m (± 0.15 m);
• – Minimum bed height: 0.30 m (± 0.5 m);
• – Maximum bed height: 0.80 m (± 0.5 m).

Options:

• DIGITAL CONTROL WITH SHIELDED MEMBRANE KEYBOARD: 2 located on the 2 side rails on the back of the bed, with internal and external activation, 1 located on the footboard with general control of the bed’s movements including locking the movements.
• Movements by wire control.
• Headboard and footboard in high-resistance molded plastic (Polyethylene); designed to be easily removed in cases of Cardiorespiratory Arrest.
• Split side rails made of high-resistance molded plastic (Polyethylene).
• Stainless steel/painted side rails.
• Bed made of high-resistance plastic (ABS), removable for better cleaning.
• Radio transparent back with X-ray tray.
• Stainless steel IV support at four points on the bed.
• Hooks for drainage bags.
• Variation in the diameter of casters with and without brakes.
• Castors with diagonal brakes.
• Full stainless steel structure.
• Oxygen cylinder support.
• Night light and nurse call.
• Back, Leg and Trendelenburg digital angle indicator.
• Dorso and Trendelenburg analog angle indicator.
• CPR via lever on both sides.
• Variation in dimensions: + – 0.35 m.
• Quick Release System.
• Trapezium.
• Balkan picture.
• Monitor support.
• Triple ruler and flowmeter.
• Mechanical Relief.
• Split leg support.
• Auxiliary exercise horse (active seat).
• Arc of Effort.
• Support for BIRD or drain under the bed.
• Leather relaxation bag.
• Shelf for accessories in stainless steel.
• Durable and resistant rubber relaxation ball.
• Dining table on pedestal with casters.
• Cover for thigh support in leatherette.
• Upholstered mattress set with protective cover.
• Structure for capacity from 200 to 380 kg for line B (Obese).
• Optional models with 2 and 3 engines.
• Audio visual alarm when the brake is activated and/or unlocked.
• Audio visual alarm for bed in lowest/highest position.
• Lowered grille audio visual alarm.
• Audio visual alarm for agitated patients.
• Biocompatible mattress in accordance with ISO 10993, anti-bedsore, antibacterial, antifungal, inflatable, flame retardant.
• Multilayer mattress with temperature-sensitive visco-elastic foam, homogeneously distributing its weight, improving the distribution of pressure points and adapting to the patient’s body in any position, resistant and fluid-proof polyurethane cover, permeable to heat , providing greater humidity control, translucent to x-rays; Latex and PVC free, comes with side handles for easy transport and handling