Characteristics:

• CHASSIS: With a base made of rectangular carbon steel metal 50 x 30 x 2.0 mm, with recessed feet, covered in high-resistance thermoplastic material with support for an oxygen cylinder.
• DECK STRUCTURE: Made of 50 x 30 x 2.0 mm carbon steel metal.
• DECK: With articulated bed with 30 x 30 x 2.0 mm metalon structure and 10 mm radio-transparent laminate for the use of image intensifier and X-rays, provided with a drawer located on the back or along the entire length, for the use of x-ray plates X. MOVEMENTS: Back, thighs and legs (lithotomy) activated by means of manual levers, through gas pistons. Movements to raise and lower the bed using the pedal. And reverse tredelenburg movements (procline) activated by means of a manual lever, through gas pistons.
• GRIDS: Sides in stainless steel tubes with semi-rotating system.
• SUPPORT: For serum in stainless steel.
• BUMPER: Attached to the ends of the headboard and footboard to protect against damage from shocks to walls and/or other furniture.
• CASTERS: 150 mm in diameter (6 inches), with diagonal double-action brakes.
• FINISH: Electrostatic powder painting with epoxy-polyester resin and polymerized in an oven, excellent chemical and mechanical resistance, after anti-rust treatment.
• CAPACITY: Maximum allowed is 250 kg. The colors of the paint finish vary according to the customer’s choice, with the standards being white or beige.
• Dimensions
• Lowest height: 0.55 +/- 0.5 cm
• Highest height: 1.05 cm +/- 0.5 cm
• Total Length: 2.05 +/- 0.20 cm
• Total Width raised railings: 115 +/- 0.40 cm
• Total Width collapsed grids: 1.0 +/- 0.40
• Grid length: 120 cm
• Rail height above mattress: 40 cm
• Trendelenburg position (18°) and ReverseTrendelenburg (-18°)
• Pneumatic elevation of the Head Section, up to 90°.

Options:

• Fully stainless steel structure.
• Hydraulic pedal for height adjustment of the stretcher on both sides.
• Simultaneous Central Braking of 04 Wheels.
• Steering Steer Pedal.
• Brake and Steer pedals at the head and footrest.
• Side protector around the entire perimeter.
• Four locations for IV Support attachment.
• Six locations for strap attachment.
• 5th Wheel.
• Radiolucent surface from feet to head.
• Sliding x-ray holder.
• Serum Support.
• Handles for transportation.
• X-ray cassette holder.
• Knee articulation via crank.
• Self Contouring of the knees.
• Oxygen Cylinder Support, integrated, horizontally.
• Oxygen Cylinder Support, vertical.
• Footboard with Monitor Support, convertible.
• Active brake on the Handles.
• Balance.
• Stainless bed or bed with epoxy paint.
• Articulated bed (1, 2, 3 or 4) sections.
• Radio transparent bed, Formica TS, Acrylic and TX.
• Castors with diagonal brake.
• Drop-down or semi-swivel stacking grates, and built-in ones.
• Triple ruler with flowmeter, humidifier and support for lung ventilator.
• Space for materials and Oxygen Cylinder.
• Monitor support.
• Angle Indicator.
• Variation in dimensions and weight capacity.
• Variation in diameter or models of casters.
• Bag hooks.
• Cover for patient transport (Treadmill).
• Straps adapted to the bed and adjustable to the patient/transport.
• Bio-compatible mattress according to ISO 10993, anti-bedsore, anti-fungus, inflatable, flame-retardant.
• Multi-layer mattress with temperature-sensitive visco-elastic foam, homogeneously distributing its weight, improving the distribution of pressure points and adapting to the patient’s body in any position, resistant and fluid-proof polyurethane cover, permeable to heat, providing greater humidity control, translucent to x-rays; Latex and PVC free, it comes with side handles to facilitate transport and manipulation.