Characteristics:
- HEADBOARD AND FOOTBOARD: removable in material
- High-resistance thermoplastic, polyethylene, finished with decorative details for children.
- BASE: in metalon 50 x 30 x 1.5 mm with recessed feet fully covered in high-quality thermoplastic material
- resistance.
- DECK STRUCTURE: made of 50 x 30 x 1.5 mm metal.
- DECK: articulated in 1.5 mm steel sheet.
- MOVEMENTS: Fowler, semi-fowler, trendelenburg, Back, Knees, Vascular, Reverse trendelenburg, equipped with limit switches, for protection, shielded, activated by wired remote control and safety device. Protection level against water penetration IPX 6.
- GRIDS: lowering sides with quick coupling system and easy access for the operator, in stainless steel tube with stainless steel guides.
- CASTERS: 4 inches (100 mm) with diagonal brakes.
- BUMPER: fixed to the ends to protect against damage due to impacts on walls and/or other furniture.
- FINISH: electrostatic powder painting with epoxy-polyester resin and polymerized in an oven, excellent chemical and mechanical resistance, after anti-rust treatment.
- CAPACITY: 180kg.
- The colors of the paint finish vary according to the customer’s choice, with the standards being white or beige.
- Dimensions
- External: 1.70 X 0.85 m ± 0.20 m
- Internal: 1.50 X 0.70 m ± 0.20 m
- Minimum bed height: 0.30 m ± 0.5 m;
- Maximum bed height: 0.80 mm ± 0.20 m.
Options:
- Full stainless steel structure.
- Models from the same family of children’s beds with 02 or 03
- ENGINES.
- DIGITAL CONTROL WITH SHIELDED MEMBRANE KEYBOARD: 2 located on the 2 side rails on the back of the bed, with internal and external activation, located on the footboard with general control of the bed’s movements, including locking the movements.
- Movements by wire control model ACO.
- Headboard and footboard in metal or with a wooden panel or covered in Formica.
- Headboard and footboard in high-resistance molded plastic (Polyethylene); designed to be easily removed in Cases of Cardiorespiratory Arrest.
- Split side rails made of high-resistance molded plastic (Polyethylene).
- Stainless steel/painted side rails.
- Perforated stainless steel/enamel bed.
- Transparent radio bed in acrylic or ABS.
- Bed made of high-resistance plastic (ABS), removable for better cleaning.
- Radio transparent back with X-ray tray.
- Stainless steel IV support at four points on the bed.
- Hooks for drainage bags.
- Variation in the diameter of casters with and without brakes.
- Castors with diagonal brakes.
- Oxygen cylinder support.
- Fifth wheel for comfort and drivability.
- Night light and nurse call.
- Bed extension on the footboard (20 cm).
- Back, Leg and Trendelenburg digital angle indicator.
- Dorso and Trendelenburg analog angle indicator.
- CPR via lever on both sides.
- Variation in dimensions: + – 0.20 m.
- Quick Release System.
- Trapezium.
- Balkan picture.
- Monitor/BIRD support.
- Triple ruler and flowmeter.
- Mechanical Relief.
- Auto Contour.
- Chair position using a single electrical control.
- Audio visual alarm when the brake is activated and/or unlocked.
- Audio visual alarm for bed in lowest/highest position.
- Lowered grille audio visual alarm.
- Audio visual alarm for agitated patients.
- Biocompatible mattress according to ISO 10993, anti-bedsore,
- antibacterial, antifungal, inflatable, flame retardant.
- Multilayer mattress with temperature-sensitive visco-elastic foam, homogeneously distributing its weight, improving the distribution of pressure points and adapting to the patient’s body in any position, resistant and fluid-proof polyurethane cover, heat-permeable , providing greater control of humidity, translucent to x-rays; Free from Latex and PVC, it comes with side handles for easy transport and handling.
