Characteristics:

• CHASSIS: With a base made of rectangular carbon steel metal 50 x 30 x 2.0 mm, with recessed feet, covered in high-resistance thermoplastic material with support for an oxygen cylinder.
• DECK STRUCTURE: Made of 50 x 30 x 2.0 mm carbon steel metal.
• BED: With articulated bed with 30 x 30 x 2.0 mm metalon structure and 10 mm radio-transparent laminate for the use of image intensifier and X-rays, provided with a drawer located on the back or along the entire length, for the use of plates of X-rays.
• GRIDS: Lowering and retractable sides, made of stainless steel tube with quick coupling device.
• MOVEMENTS: Elevation, tilt and trendelenburg through two motorized telescopic columns.
• MOVEMENTS: Back and knees powered by gas pistons with manual activation.
• CASTERS: 150 mm in diameter (6 inches), with conductive polyurethane tread, with movement resistance/brake activated by a single pedal, placed on two sides of the stretcher trolley base, allowing free movement of the 4 casters in all directions, being able to direct 2 casters for long distances and lock the 4 casters, preventing the stretcher carriage from moving.
• CONTROL: Trendelenburg movements, reverse Trendelenburg (procline), lowering and raising the bed, controlled by a standard wired remote control.
• FINISH: Electrostatic powder painting with epoxy-polyester resin and polymerized in an oven, excellent chemical and mechanical resistance, after anti-rust treatment.
• CAPACITY: Maximum working capacity is 250 kg. The colors of the paint finish vary according to the customer’s choice, with the standards being white or beige.
• Dimensions
• External: 2.05 x 0.75 ± 0.20 m
• Internal: 1.90 x 0.60m ± 0.20 m
• Height adjustment
• Minimum: 0.55 ± 0.5 m
• Maximum: 1.05 ± 0.5 m
• Accessories
• Stainless steel serum support with adjustable height adjustment in the 4 corners of the bed
• Straps for patient safety.
• Rubber bumper all around or in the 4 corners of the stretcher.
• Dimensions
• Lowest height: 0.55 +/- 0.5 cm
• Highest height: 1.05 cm +/- 0.5 cm
• Total Length: 2.05 +/- 0.20 cm
• Total Width raised railings: 115 +/- 0.40 cm
• Total Width collapsed grids: 1.0 +/- 0.40
• Grid length: 120 cm
• Rail height above mattress: 40 cm
• Trendelenburg position (18°) and Reverse Trendelenburg (-18°)
• Pneumatic elevation of the Head Section, up to 90°.

Options

• Fully stainless steel structure.
• Hydraulic pedal for height adjustment of the stretcher on both sides.
• Simultaneous Central Braking of 04 Wheels.
• Steering Steer Pedal.
• Brake and Steer pedals at the head and footrest.
• Side protector around the entire perimeter.
• 04 places to attach the Serum Support.
• 06 places for strap attachment.
• 5th Wheel.
• Radio luminous surface from feet to head.
• Sliding x-ray holder.
• Serum Support.
• Handles for transportation.
• X-ray cassette holder.
• Knee articulation via crank.
• Self Contouring of the knees.
• Oxygen Cylinder Support, integrated, horizontally.
• Oxygen Cylinder Support, vertical.
• Footboard with Monitor Support, convertible.
• Active brake on the Handles.
• Balance.
• Stainless bed or bed with epoxy paint.
• Articulated bed (1, 2,3 or 4) sections.
• Radio transparent bed, Formica TS, Acrylic and TX.
• Castors with diagonal brake.
• Drop-down or semi-swivel stacking grates, foldable and built-in.
• Triple ruler with flowmeter, humidifier and support for lung ventilator.
• Space for materials and Oxygen Cylinder.
• Monitor support.
• Angle Indicator.
• Variation in dimensions and weight capacity.
• Variation in diameter or models of casters.
• Bag hooks.
• Cover for patient transport (Treadmill).
• Straps adapted to the bed and adjustable to the patient/transport.
• Biocompatible mattress according to ISO 10993, anti-bedsore, anti-fungus, inflatable, flame-retardant.
• Multilayer mattress with temperature-sensitive visco-elastic foam, homogeneously distributing its weight, improving the distribution of pressure points and adapting to the patient’s body in any position, resistant and fluid-proof polyurethane cover, permeable to heat , providing greater humidity control, translucent to x-rays; Latex and PVC free, it comes with side handles to facilitate transport and manipulation.