Characteristics:

• HEADBOARD AND FOOTBOARD: Removable, made from high-resistance thermoplastic material and completely polyethylene.
• BASE: Recessed, made of rectangular carbon steel metal; 50 x 30 x 2.0 mm, covered by a heat-formed fairing made of high-resistance thermoplastic material.
• DECK: Constructed of rectangular carbon steel metalon; 50 x 30 x 2.0 mm.
• BED: Articulated in 4 sections, with a rigid structure made of 2.0 mm perforated steel sheet.
• SIDE RAILS: Two pairs of side rails, one pair on the back and one pair on the leg, independently acting, injected in polyethylene, fixed to the bed, with a retractable system, allowing them to be above and below the bed.
• MOVEMENTS / MOTORS: Fowler, Trendelenburg, Sitting, Back, Knees, Vascular and bed elevation movements, controlled by 3 motors, 2 of which are installed under the platform and 1 installed on the base, equipped with end switches and shielded, for protection, Bivolt main voltage, 50/60 Hz, with battery units of voltage 24 V, current 10A, rechargeable. Protection level against water penetration IPX 6.
• CONTROL: Supervisory control ACO: Wired remote control that controls all movements of the bed, and has a safety device that locks them/nursing control. CPR, Trendelenburg functions with a single touch of command.
• BUMPER: Bumpers attached to the ends
• to protect against damage from shocks to walls and/or
• other furniture.
• CASTERS: 150 mm diameter casters with band
• conductive tread made of polyurethane, with
• movement/brake activated by a single pedal, placed
• on two sides of the bed base, allowing movement
• free of the 4 casters in all directions, being able to
• direct 2 casters for long travels and lock the 4
• casters, preventing the bed from moving.
• FINISH: Electrostatic powder painting with epoxy resin
• polyester and polymerized in an oven, excellent resistance
• chemical and mechanical, after anti-rust treatment.
• CAPACITY: 180 kg.
• Paint finish colors vary depending on
• at the customer’s option, the standards being white or beige.
• Dimensions
• – External: 2.13 x 1.05 m (± 0.15 m)
• – Internal: 1.90 x 0.90 m (± 0.15 m)
• – Minimum bed height: 0.30 m (± 0.5 m)
• – Maximum bed height: 0.80 m (± 0.5 m

Options:

• DIGITAL CONTROL WITH SHIELDED MEMBRANE KEYBOARD: 2 located on the 2 side rails on the back of the bed, with internal and external activation, 1 located on the footboard with general control of the bed’s movements including locking the movements.
• CONTROL by FPP satellite command: its fixation is carried out using a flexible rod to the back section. This control system has the possibility of repositioning at different points of the bed, also easily accessed by the patient, companion or medical team operator and, once released by the ACO supervisory control, activates the back, leg and bed elevation actuators.
• Movements by wire control.
• Headboard and footboard in metal or with a wooden panel or covered in Formica.
• Headboard and footboard in high-resistance molded plastic (Polyethylene); designed to be easily removed in cases of Cardiorespiratory Arrest.
• Split side rails made of high-resistance molded plastic (Polyethylene).
• Stainless steel/painted side rails.
• Perforated stainless steel/enamel bed.
• Transparent radio bed in acrylic or ABS.
• Bed made of high-resistance plastic (ABS), removable for better cleaning.
• Radio transparent back with X-ray tray.
• Stainless steel IV support at four points on the bed.
• Hooks for drainage bags.
• Variation in the diameter of casters with and without brakes.
• Castors with diagonal brakes.
• Full stainless steel structure.
• Oxygen cylinder support.
• Fifth wheel for comfort and drivability.
• Night light and nurse call.
• Bed extension on the footboard (35 cm).
• Built-in scale.
• Back, Leg and Trendelenburg digital angle indicator.
• Dorso and Trendelenburg analog angle indicator.
• CPR via lever on both sides.- Variation in dimensions: + – 0.35 m.
• Trapezium.
• Balkan picture.
• Monitor support.
• Triple ruler and flowmeter.
• Mechanical Relief.
• Auto Contour.
• Structure for capacity from 200 to 380 kg for line B
• (Obese).
• Optional models with 2 and 4 motors.
• Chair position using a single electrical control.
• Audio visual alarm when the brake is activated and/or unlocked.
• Audio visual alarm for bed in lowest/highest position.
• Lowered grille audio visual alarm.
• Audio visual alarm for agitated patients.
• Biocompatible mattress in accordance with ISO 10993, anti-bedsore, antibacterial, antifungal, inflatable, flame retardant.
• Accessory Included:
• Multilayer mattress with visco-elastic foam sensitive to moisture
• temperature, evenly distributing its weight,
• improving the distribution of pressure points and
• adapts to the patient’s body in any position, cover
• made of resistant, fluid-proof, permeable polyurethane
• to heat, providing greater humidity control,
• translucent to x-rays; Latex and PVC free, comes with
• side handles to facilitate transport and manipulation.