Characteristics:

• HEADBOARD AND FOOTBOARD: Removable, made from high-resistance thermoplastic material (ABS), and completely filled with polyurethane.
• BASE: Recessed, made of rectangular carbon steel metal; 50 x 30 x 2.0 mm, covered by a heat-formed fairing made of high-resistance thermoplastic material.
• DECK: Constructed of rectangular carbon steel metalon; 50 x 30 x 2.0 mm.
• BED: Made from square carbon steel metalon; 30 x 30 x 2.0 mm, articulated in 4 sections covered in high-resistance thermoplastic material (ABS), removable and easy to clean.
• SIDE RAILS: Two pairs of side rails, one pair on the back and one pair on the leg, independently acting, injected in polyethylene, fixed to the bed, with a retractable system, allowing them to be above and below the bed.
• MOVEMENTS / MOTORS: 4 motors execute the movements: Fowler, Semifowler, Trendelenburg, Sitting, Back, Knees, Vascular, self-contour, cardiac chair, armchair position, Reverse Trendelenburg (procline) and Bed Elevation, controlled by 4 motors, 2 of which installed under the platform and 2 installed on the base, equipped with limit switches, for protection, shielded, bivolt main voltage, input frequency 50/60 Hz, with battery units with 24 VDC voltage and 10 A current, rechargeable. Protection level against water penetration IPX 6.
• CONTROL: Supervisory control ACO: Wired remote control that controls all movements of the bed, and has a safety device that locks them/nursing control. CPR, Trendelenburg functions with a single touch of command. FPP satellite condo: its fixation is carried out using a flexible rod to the back section. This control system has the possibility of repositioning at different points of the bed, also easily accessed by the patient, companion or medical team operator and, as long as it is released by the ACO supervisory control, it activates the back, leg and bed elevation actuators. With optional standard wired remote control.
• BUMPER: Bumper fixed to the ends to protect against damage from impacts on walls and/or other furniture.
• CASTERS: 200 mm diameter casters with conductive polyurethane tread, with movement/brake system activated by a single pedal, placed on two sides of the bed base, allowing free movement of the 4 casters in all directions, being able to direct 2 casters for long distances and lock the 4 casters, preventing the bed from moving. It has a 5th wheel to facilitate maneuvers with pedal operation.
• SCALES: Incorporated into the bed to weigh the patient, eliminating the need to remove the patient. For measuring weight separately. With digital control located on the outside of the footrest, easy to use, with a single touch, it maintains the patient’s weight, making it possible to include or remove accessories on the bed or on the patient; weighing it in any position.
• Electrostatic powder painting finish with epoxy polyester resin and polymerized in an oven, excellent chemical and mechanical resistance, after anti-rust treatment.
• CAPACITY: 380 kg.
• The colors of the paint finish vary according to the customer’s choice, with the standards being white or beige.
• Dimensions
• – External: 2.08 x 1.049 m (± 0.15 m)
• – Internal: 1.90 x 0.90 m (± 0.15 m)
• – Minimum bed height: 0.30 m (± 0.5 m)
• – Maximum bed height: 0.80 m (± 0.5 m

Options

• DIGITAL CONTROL WITH MEMBRANE KEYBOARD
• SHIELDED: 2 located on the 2 existing side rails
• on the back of the bed, with internal and external activation, 1
• located on the footrest with general movement control
• of the bed, including movement restraint.
• Movements by wire control.
• Headboard and footboard in metal or with wooden panel
• or coated in Formica.
• Headboard and footboard in metal or with wooden panel
• or coated in Formica.
• Split side rails in high quality molded plastic
• resistance (Polyethylene).
• Stainless steel/painted side rails.
• Perforated stainless steel/enamel bed.
• Transparent radio bed in acrylic or ABS.
• Bed made of high-resistance plastic (ABS), removable for
• better cleaning.
• Radio transparent back with X-ray tray.
• Radio transparent back with X-ray tray.
• Hooks for drainage bags.
• Variation in the diameter of casters with and without brakes.
• Castors with diagonal brakes.
• Full stainless steel structure
• Oxygen cylinder support.
• Fifth wheel for comfort and drivability.
• Night light and nurse call.
• Bed extension on the footboard (35 cm)-
• Built-in scale.
• Back, Leg and Trendelenburg digital angle indicator.
• Dorso and Trendelenburg analog angle indicator.
• CPR via lever on both sides.
• Variation in dimensions: + – 0.35 m.
• Trapezium.
• Balkan picture.
• Monitor support.
• Triple ruler and flowmeter.
• Mechanical Relief.
• Auto Contour.
• Structure for capacity from 200 to 380 kg for line B
• (Obese).
• Optional models with 2 and 3 engines.
• Cardiac chair position.
• Audio visual alarm when the brake is activated and/or unlocked.
• Audio visual alarm for bed in lowest/highest position.
• Lowered grille audio visual alarm.
• Audio visual alarm for agitated patients.
• Biocompatible mattress according to ISO 10993, anti-bedsore,
• antibacterial, antifungal, inflatable, flame retardant
• Accessory Included:
• Multilayer mattress with temperature-sensitive visco-elastic foam, homogeneously distributing its weight, improving the distribution of pressure points and adapting to the patient’s body in any position, resistant and fluid-proof polyurethane cover, permeable to heat , providing greater humidity control, translucent to x-rays; Latex and PVC free, comes with side handles for easy transport and handling